 |
|
|
|
Component Translators with Color Bars Generator
designed on an “Europe” 3U electronic board |
|
|
ACG 110 - RGB-YUV to 2 x RGB-YUV |
96Ko |
 |
The ACG 110 proposes two functions:
- RGB or YUV color bars generator
- RGB to YUV or YUV to RGB translator
The ACG 110 offers two modes of functioning
- free mode on internal reference
- genlock mode on external reference or Y/G input
The ACG 110 is able to restore synchronization and blank signals. Outputs of the ACG 110 are clamped.
|
|
|
|
|
|
|
ACT 290 - RGB-YUV with loop-through to RGB-YUV |
97Ko |
|
|
The RGB-YUV translator ACT 290 is used to connect: RGB to YUV (EBU) component video signals and vice-versa. The ACT 290 is genlockable on external reference or on Y/G input. It allows to restore DC level, synchronization and blanking signals. It has a built-in color bars generator too.
|
|
|
|
|
Decoder
designed on an “Europe” 3U electronic board |
|
|
ACD 220 - PAL-SECAM-Y/C to RGB-YUV |
88Ko |
|
|
The ACD 220 multistandard decoder allows to convert the PAL SECAM or Y/C (4.43 MHz) composite video signals in an analogue RGB or YUV signal. The ACD 220 uses an analogue decoder standard chip. |
|
|
|
|
Encoders
designed on an “Europe” 3U electronic board |
|
|
ASE 230 - RGB-YUV to SECAM |
93Ko |
|
|
The ACD 230 is a broadcast SECAM encoder. It allows to convert the RGB or YUV component video signals into SECAM composite environment.
|
|
|
|
|
|
|
APE 240 - RGB-YUV to PAL-Y/C |
94Ko |
|
|
The APE 240 is PAL-Y/C analogue broadcast encoder. It allows to convert the RGB or YUV component video signals into a PAL or Y / C (4,43 MHz) composite environment.
|
|
|
|
|
|
|
LPE 241 - RGB-YUV to PAL-Y/C - monitoring |
91Ko |
|
|
The PAL-Y/C encoder LPE 241 is the ideal product which answers to the quality of monitoring applications. It allows to connect: RGB or YUV (EBU) component video signals into a PAL or Y /C (4,43 MHz) composite environment.
|
|
|
|
|
Composite Translators
|
|
|
TPS 250 - PAL-SECAM-Y/C to RGB-YUV-SECAM |
24Ko |
|
|
|
|
|
|
TSP 260 - PAL-SECAM-Y/C to RGB-YUV-PAL-Y/C |
26Ko |
|
|
|
|
|
|
TMS 270 - PAL-SECAM-Y/C to RGB-YUV-PAL-Y/C-SECAM |
30Ko |
|
|
|
|
Distribution Amplifiers
designed on an “Europe” 3U electronic board |
|
|
AVD 200 - 1 to 8 |
91Ko |
|
|
The AVD 200 is a high-quality, analogue video or digital audio distribution amplifier. This distribution amplifier accepts NTSC, PAL, SECAM, component video, digital audio and computer graphic signals and is ideal for color black distribution.
|
|
|
|
|
|
|
AVD 205 - 1 x 1 to 15 up to 4 x 1 to 3 - configurable |
101Ko |
|
|
The AVD 205 is a high-quality, multiconfigurable analogue video distribution amplifier. Up to 4 distribution amplifier channels are available on the same electronic board. The number of outputs for each distribution amplifier depends on the configuration choice and of the AVD 205 board on the 19” 3U or 19” 1U rackframe. Each channel of AVD 205 includes a differential input, DC restorer and a cable equalization correction.
|
|
|
|
|
|
|
AVD 215 - 1 to 15 |
91Ko |
|
|
The AVD 215 is a high-quality, analogue video distribution amplifier. The AVD 215 output number depends on 1U / 3U rackframe: -M-AVD 215 '3U': 15 outputs / - '1U': 11 outputs
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Last Updated: Sept 17, 2001
|
